Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Provo?
Spring repair in Provo typically costs $180 – $340 for one spring, and that includes the replacement spring, the labor, and balancing the door afterward so it lifts evenly. If both springs are replaced as a matched pair, which is usually the smarter call on a double-car door, expect roughly double that range. These are typical estimated ranges for the Provo market; the written estimate we hand you before any work starts sets the final price, and that estimate is free.
Provo Garage Door extends a single promise across the whole valley: one call covers the door, the hardware, and the opener, and every price is spelled out before a technician touches anything.
Spring Replacement Cost Breakdown (2026)
Here’s how the pieces usually shake out. The spring itself is a small part of the bill. Most of what you pay for is getting the right spring matched to your door’s weight, lifting it safely, and dialing the door back to balance.
| Line item | Typical estimated range |
|---|---|
| Single torsion spring replacement (one spring) | $180 – $340 |
| Matched pair of torsion springs (about twice one spring) | $360 – $680 |
| Extension spring replacement (per spring) | $180 – $340 |
| Spring replacement plus cable replacement | $130 – $250 for the cable work, added to the spring cost |
| Spring replacement plus roller swap | $110 – $220 for the rollers, added to the spring cost |
| Broader garage door repair (spring plus adjacent hardware) | $150 – $600 |
| Opener repair discovered during the same visit | $120 – $320 |
What pushes the number toward the top of a range? Doors that are heavier than standard, tight side clearance that makes the spring swap awkward, springs that have snapped and twisted the door out of alignment, or an old setup where the cables are just as worn as the springs. What keeps it near the bottom? A clean single-spring job on a standard door where the cables and rollers are still sound.
What Affects Spring Replacement Pricing in Provo
- Door weight and size. A single-car door needs less spring than a wide double-car door, and the spring has to be matched precisely to the panel weight. A door loaded with glass or a heavyweight panel needs a heavier spring, which moves the price up.
- Torsion vs. extension springs. Most doors in the neighborhoods around Provo, from the older blocks near downtown out to newer builds in the east bench areas, run torsion springs mounted on a shaft above the door. Extension springs stretch along the tracks and sit in a slightly different price bracket because the safety setup differs.
- One spring or a matched pair. When one torsion spring breaks, the other is usually the same age and not far behind. Replacing both at once costs about twice one spring but saves you a second service call later. We’ll tell you which one actually makes sense for your door.
- Condition of the cables and rollers. A snapped spring often takes a cable with it. Worn rollers make a fresh spring work harder. If those parts are near the end, folding them into the same visit is usually cheaper than paying for two separate trips.
- Door alignment. A door that slammed down when the spring let go can knock the tracks out of line. Track realignment runs $120 – $240 on its own, and it has to happen before the door can be balanced on a new spring.
- Access and ceiling height. Low-clearance garages and tight side room make the work slower, and slow work is what nudges a quote upward. A standard, open bay is the quickest job.
Provo’s dry summers and cold winters work garage door hardware hard. The temperature swings from a hot July afternoon to a freezing January morning cause metal to expand and contract, and springs that cycle through that year after year are the ones that give out first. That’s a plain fact of living here, not a scare tactic.
How to Save on Spring Replacement
You don’t have to pay the top of the range. A few practical moves keep the bill down:
- Fix it when the first sign shows. A door that’s getting heavy, squealing, or slow to lift is telling you the spring is tired. Catching it early usually means a straightforward spring swap instead of spring plus cables plus tracks.
- Ask for the pair price. If one of two matched springs has gone, price both. The per-spring cost on a pair is almost always better than two separate single jobs down the road.
- Bundle worn hardware. If your rollers or cables are on their last legs, adding them to the spring visit costs less than booking a separate repair later.
- Get the free estimate in writing. Ask for the estimate before work begins so you’re comparing apples to apples. Call (877) 526-0732 and we’ll give you a straight estimate over the phone and confirm it on site.
- Skip the DIY route on torsion springs. This is the one place we’ll always push back. Torsion springs are under serious tension, and a spring that lets go while someone is winding it can cause real injury. Leave it to a trained technician.
Why Spring Trouble Is Worth Fixing Fast
A broken spring doesn’t just make noise. It stops the door, and a door stuck halfway or hanging limp means your car is trapped and the largest opening in your house is effectively unusable. Getting it sorted quickly keeps your day moving and keeps the door from straining the opener, which is a separate system that wears out fast when it’s fighting a dead spring.
That’s why we treat spring replacement as core work, not a side job. Our technicians have up to 14 years of experience, and every one of them knows that a garage door is really two systems working together: the door and its hardware, and the opener driving it. When a spring fails, the opener often takes the hit. If your opener is straining, grinding, or reversing for no reason, that’s its own repair, and we handle it too.
One call covers the door, the hardware, and the opener. We work on eight major brands, so whether your door is a Clopay, an Amarr, a Wayne Dalton, or a Raynor, and whether the opener on the ceiling is a LiftMaster, a Chamberlain, a Genie, or a Craftsman, there’s no brand mismatch and no handoff to a second company. Eight brands. One specialist. If you’re in Provo and your door is one of them, we can help.
How a Spring Replacement Usually Goes
Understanding the process helps you know what you’re paying for. A typical spring job starts with a weight check: we measure how the door balances and confirm the existing spring size so the replacement matches. Then the old spring comes off, the new one goes on, and the door gets tested through several full cycles to confirm it lifts smoothly and stays put when it’s halfway open.
If the cables or rollers show wear, we’ll flag it before we finish rather than after. Springs, cables, and rollers are all part of the same lifting system, so it makes sense to look at them together. The goal is a door that runs quietly and safely, not just one that opens again.
Because a broken spring is urgent for most households, we keep the process efficient. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Repair or Replace: Which Makes Sense?
Most of the time, a broken spring is a repair, not a replacement. A door with solid panels, straight tracks, and sound hardware can run for years on a fresh set of springs. Replacement starts to make sense when the door itself is worn out: cracked panels, rusted-through sections, or a door so old that replacement parts are hard to match. A full new door installation runs $700 – $2,200, so it’s a bigger decision, and we’ll tell you honestly whether your current door has life left in it.
If the panels are the only issue and the frame is sound, panel replacement runs $250 – $500 and keeps the rest of the door in service. If the opener is what’s failing rather than the door, opener repair runs $120 – $320 and a new opener install runs $250 – $550. Spring trouble, cable trouble, and opener trouble can feel like one big problem from the driver’s seat, so the first job is figuring out which system actually failed.
FAQs – Spring Replacement Cost
How much does it cost to replace a garage door spring in Provo?
One spring typically runs $180 – $340 in Provo, and a matched pair costs about twice that, so $360 – $680. The written estimate sets the final price. Call (877) 526-0732 for a free estimate and we’ll confirm the number for your specific door.
Is it cheaper to repair or replace a garage door spring?
Repair is almost always cheaper than replacing the whole door. A spring replacement runs $180 – $340 for one spring, while a full new door installation runs $700 – $2,200. Unless the door panels or frame are failing too, replacing the spring is the right call. Call (877) 526-0732 and we’ll tell you which one actually makes sense for your door.
Should I replace both springs if only one broke?
Usually yes, if your door has two matched torsion springs. Both springs have cycled the same number of times, so the second one is often close behind the first. A pair costs about twice one spring ($360 – $680 total), which is often less than paying for two separate service calls. Call (877) 526-0732 to price both options.
Why is my spring replacement quote higher than the range here?
Heavier doors, tight clearance, damaged cables or tracks, or a door that needs realignment can push the price above the typical range. The base spring cost is $180 – $340 for one, and any added cable work ($130 – $250) or track realignment ($120 – $240) is priced separately. Call (877) 526-0732 for a free estimate that accounts for your door’s actual condition.
Can you come today for a broken spring?
Same-day service is often possible, and the earlier you call the better the chance. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (877) 526-0732 to get on the schedule.
Get a Straight Answer on Your Spring Cost
You don’t need to guess what a spring replacement will run. Tell us your door type, whether it’s one spring or two, and what it’s doing when you try to open it, and we’ll give you a typical range up front. The written estimate confirms it, and it’s free. Call (877) 526-0732. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If your door is stuck today, call now and we’ll get you on the schedule.
If you’d rather read more about how we handle repairs and installations across Utah County before you call, start with Provo Garage Door Service or see everything we cover in Provo.
Written by the team at Provo Garage Door Service.
Pricing reflects the Provo market as of 2026. Provo Garage Door Service offers free estimates – call (877) 526-0732.
What Our Customers Say
"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Marco Reyes"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Kristen Novak"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Eric Doyle